Cold Shuts

Started by Fulvio, June 26, 2013, 09:47:49 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Fulvio

So as to not hijack the thin planchet penny thread, here's the promised pics of this 10¢:

2010 10¢ "Crochet Hook" cold shut


I've got others, mostly $1, and all the more usual scythe-shaped spurs, but it may be a while before I can find them to photograph. No doubt others have examples to post though. :)
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

robbiegal


Fulvio

Quote from: 'robbiegal' pid='19506' dateline='1372251109'die clash?

Nope. Its actually a planchet flaw, not a die error.
You could (at least in theory) flake that piece off, leaving a cavity.
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

Goldseeker

Yep, I have several $1 coins that show the same "error"

I reported this in the now defunct Forum as a cold shunt and was blasted out od the paddock as they say.   The cold shunt was advised to me by a gent that had his own business and dealt with sheet metals.   He had the business for years.

I am glad someone other than me is calling this "error" a cold shunt.

I shall dig my $1 cold shunt errors out later and scan them for display.
Message rec\'d from Jens Coins 18 Jul 23: 
Bruce Mansfield passed away today 18 Jul 2023 – Acute Myeloid Leukemia


Fulvio

Quote from: 'Goldseeker' pid='19511' dateline='1372255740'cold shunt

Umm, its "shut", as in door, not "shunt", as in train, Goldy. Lots of people make that mistake, and really cheese off the blacksmiths. :)

As for calling it an error, well, its not repeatable. Which is why I call them flaws, along with strikethroughs, fills, split planchets, brockages, etc etc etc.

Can't wait to see your pics, especially if you have some really cool ones. :)
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

markn

Cold shut it is.  I'm a bit perplexed as to how you can tell the difference between a planchet flaw and a "cold shut".  One is due to crap in the planchet, one is due to cold metal not being welded to hot metal.
Founder: Australian Coin Forum
The Australian Coin Collecting Blog

ausjack

ya gotta be jokin, now there's another spanner in the works..can anyone think of any other errors or ways to get them..took a long time to pick up with this type
A wise person knows there is something to learn from everyone.

Nevol

Quote from: 'ausjack' pid='19546' dateline='1372288945'ya gotta be jokin, now there's another spanner in the works..can anyone think of any other errors or ways to get them..took a long time to pick up with this type
I've been saving these for ages, I thought originally they were called 'cold shunt' then someone else referred to them as 'Rim Burrs' so now I know what they're really called, I'll have to see if I can find the little blighters.

I do have images, but they're all scans from before I got my cud'a'scope, and I can't even see the error on some of them, so they'll all need to be done again when I find them,  but not till the Tennis is over.  :angel:
A Platypus is a duck designed by a committee ( anon)

Fulvio

Quote from: 'markn' pid='19535' dateline='1372284119'I'm a bit perplexed as to how you can tell the difference between a planchet flaw and a "cold shut".  One is due to crap in the planchet, one is due to cold metal not being welded to hot metal.

Good question. The way I think of it, a cold shut is on the surface, and visible from day one. Its also all metal, so holds together pretty well. A planchet flaw is internal, and you don't know its there until it starts to let go and the coin peels, cracks or splits. If the crap were on the surface, it would get rolled out and either be long gone before the planchet was stamped, or appear as surface inclusions which would pit the surface. I do have some of the latter, and generally I try and help them go away, leaving the hole behind. I treat the resulting coin like any other strikethrough, though really it isn't.

Quote from: 'ausjack' pid='19546' dateline='1372288945'ya gotta be jokin, now there's another spanner in the works..can anyone think of any other errors or ways to get them..took a long time to pick up with this type

Hehe.. now ya see why I decided to differentiate between errors and flaws? :angel:

Errors have been pretty well exhaustively documented by now. There's only so many things you can do to a die without setting off alarm bells, even when QC is a joke.

Flaws, well, there must be hundreds of things that can go wrong, physically, metallurgically, chemically... You're dealing with some pretty heavy-duty industrial processes in really dirty environments, and even a minor event can end up a major flaw under a microscope.

That's what makes it so much fun I reckon. :yahoo:
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

markn

Quote from: 'Fulvio' pid='19560' dateline='1372313211'Good question. The way I think of it, a cold shut is on the surface, and visible from day one. Its also all metal, so holds together pretty well. A planchet flaw is internal, and you don't know its there until it starts to let go and the coin peels, cracks or splits. If the crap were on the surface, it would get rolled out and either be long gone before the planchet was stamped, or appear as surface inclusions which would pit the surface. I do have some of the latter, and generally I try and help them go away, leaving the hole behind. I treat the resulting coin like any other strikethrough, though really it isn't.

Interesting theory but planchet flaws are often quite visible on the surface.   I'd think that the edges of planchet flaws look quite different to cold shuts though.  Planchet flaws are quite ragged.  The cold shut, which is essentially a piece of cold metal being rolled into the coining metal probably wont end up looking like that.
Founder: Australian Coin Forum
The Australian Coin Collecting Blog

Fulvio

Quote from: 'markn' pid='19561' dateline='1372313678'planchet flaws are often quite visible on the surface.

Ever seen a peel on a new coin? I don't think I've ever found one younger than 15-20 years or so. Maybe they're there and just not visible until they start to lift off though. In which case the cud-o-scope™ might reveal all. :)
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

purplepennyhunter

Alan Herbert describes this as "rolled in metal" suggesting a piece of coin metal fragment may find it's way back onto the strip as it's being rolled but doesn't end up adhering as suggested here. I like the pastry rolling analogy as I can associate with that. I have dabbled in welding in my time though.

This is an interesting thread.
Co-Founder Australian Coin Forum

markn

Quote from: 'Fulvio' pid='19568' dateline='1372314432'
Quote from: 'markn' pid='19561' dateline='1372313678'planchet flaws are often quite visible on the surface.

Ever seen a peel on a new coin? I don't think I've ever found one younger than 15-20 years or so. Maybe they're there and just not visible until they start to lift off though. In which case the cud-o-scope™ might reveal all. :)

I have UNC copper coins with peels visible on the surface yes.
Founder: Australian Coin Forum
The Australian Coin Collecting Blog

ausjack

I'll have to keep an eye out be when noodling I have come across newer coins that look like road kill but now I'm thinking it might be something else waiting to happen..next time I find one I'll post a pic..looks sort of like they're crazing like paint does..very odd
A wise person knows there is something to learn from everyone.

Fulvio

Quote from: 'markn' pid='19573' dateline='1372315569'I have UNC copper coins with peels visible on the surface yes.

I didn't mean condition, I meant age. Not a lot of 2013 copper around that I've seen. :angel:

Quote from: 'ausjack' pid='19575' dateline='1372315824'sort of like they're crazing like paint does..very odd

I don't think I've seen an explanation for what that orange-peel is, AJ. I'm dying to know though...
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW