1913 penny

Started by stevo1962, March 16, 2013, 05:47:52 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

stevo1962

Just won this coin and would be interested in grading
opinions thanks

[attachment=1437]
[attachment=1436]
It\'s not about who you know it\'s about what you know

enworb

Look nce. Ef-gEF i reckon. Ive been after a 1913 for ages so im very jealous of that one. Nice pick up.

trout

EF-AU 50 nice picup mate,sweet coin.
Aim well to enjoy life. You only get One shot at it.
Illegitimi non carborundum

echidna

1913s are always a bit weak on the obverse.
This one is almost UNC in my opinion.

stevo1962

Quote from: 'echidna' pid='9760' dateline='1363421876'1913s are always a bit weak on the obverse.
This one is almost UNC in my opinion.

 Yes I've seen a slabbed example that has virtually the same obverse graded at AU58
It\'s not about who you know it\'s about what you know

trout

Quote from: 'echidna' pid='9760' dateline='1363421876'1913s are always a bit weak on the obverse.
This one is almost UNC in my opinion.

SERIOUSLY, I doubt that ?
 AU50 is the best this could  be IMHO which = a EF:good:
Aim well to enjoy life. You only get One shot at it.
Illegitimi non carborundum

robbiegal

a very nice coin there Steveo - i'd be happy to tuck that KGV into one of my albums
nice gloss to the surfaces & remaining lustre which is an instant EF
the rest is then the 'art of it'
knowing the year, the dies, strike types etc

obverse rims are a tad bumpy so I'd be inching towards a safe a/unc - a/unc+

but having said my waffle, I am much more confident with having a go at grading the 1940's copper coins - they are my particular interest for these fabulous grading challenges - hence why your 1946 was soooo much fun for me to have a go at grading
 
cheers Robbie

stevo1962

Quote from: 'robbiegal' pid='9783' dateline='1363431265'a very nice coin there Steveo - i'd be happy to tuck that KGV into one of my albums
nice gloss to the surfaces & remaining lustre which is an instant EF
the rest is then the 'art of it'
knowing the year, the dies, strike types etc

obverse rims are a tad bumpy so I'd be inching towards a safe a/unc - a/unc+

but having said my waffle, I am much more confident with having a go at grading the 1940's copper coins - they are my particular interest for these fabulous grading challenges - hence why your 1946 was soooo much fun for me to have a go at grading
 
cheers Robbie

Yes the 1913 penny was a nice pickup for $83 but I had to go to Rotterdam in the Netherlands to get it
It\'s not about who you know it\'s about what you know

interest

That's one thundered years old now.
Nice coin

stevo1962

Coin arrived today and I still think it's aUNC


[attachment=1566]   [attachment=1565]
It\'s not about who you know it\'s about what you know

wwwww

From the first photo I would've gone with AU53 but from the last set of photos I'd say AU58.

stevo1962

Quote from: 'wwwww' pid='10950' dateline='1364445853'From the first photo I would've gone with AU53 but from the last set of photos I'd say AU58.

Thanks Walter I was quietly confident and hoping that it was AU58
It\'s not about who you know it\'s about what you know

trout

Sharp legends and devices show only a trace of wear on the highest points. There must be some remaining mint luster.

AU 50 old mate.
sorry Walter I tend to disagree with your AU58 grade on this coin.
AU50 -55 simply because most of the lustre has gone on this coin.
To get a 58 grade most of the lustre should be there IMHO :ok:
Just my opinion but it is my Honest opinion :good:
Aim well to enjoy life. You only get One shot at it.
Illegitimi non carborundum

wwwww

When grading circulated coins you measure wear, mint lustre indicates an absence of wear but an absence of mint lustre doesn't necessarily indicate wear. Lustre can be lost to residue filling, environmental damage or non-circulation forms of wear (such as cleaning).

While on silver the level of environmental damage required to disrupt lustre usually renders the coin undesirable anyway, on copper based alloys environmental damage can at times hide lustre through relatively normal exposure. The key (assuming details are at an AU level) is to look for a relative difference between the protected surfaces and the exposed surfaces as wear characteristically affects the exposed surfaces. If the protected surfaces show no lustre, then you're never going to have lustre in the exposed surfaces so you can't really use the absence of lustre as an indication of wear.

The other important cause is residue filling. Lustre is caused by light reflecting off tiny grooves, if these grooves are filled with a containment, lustre will be subdued or hidden. This doesn't affect the grading of a coin but it does make it difficult to grade from lustre. As with environmental damage, comparing the lustre in the exposed surfaces to those in the fields is a better measure.

trout

Quotecomparing the lustre in the exposed surfaces to those in the fields is a better measure.
this is exactly how I came about my grade :good:
On the obverse of this coin it has lustre in the fields but none on the high points.
On a KGV coin for an AU58 I would expect to see at least some remaining  lustre in the kings beard.

I may be grading my coins too hard, but that is the way I treat all my own coins :ok:
Aim well to enjoy life. You only get One shot at it.
Illegitimi non carborundum