Noodling finds

Started by Nevol, December 23, 2012, 05:35:51 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Nevol

All good pick-ups Jeff.  It's obvious you did get most of the contents of the 'mother lode'.  Well done!

AJ, You're getting good at spotting the smaller errors! I don't think I've ever seen that 20c cud before, so you can chalk that one up. :yahoo: :winkextra:
A Platypus is a duck designed by a committee ( anon)

Fulvio

Quote from: 'Nevol' pid='43646' dateline='1394588436'I don't think I've ever seen that 20c cud before, so you can chalk that one up. :yahoo: :winkextra:

Me neither. Dunno how you do it, AJ!
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

ausjack

so ya like that than what about this :winkextra: suss Mr Squiggle and I just found five and look at how good the coins are that I have to deal with :( I also found one well actually a few with a dot to the left of where the suiggle is but they don't have the suiggle, just the dot.



Oh and they are 2013 sorry :(
A wise person knows there is something to learn from everyone.

Unicorn

Top spotting AJ ....... on par with McDuck's Quack!

PS: Thanks for saving me from asking what year it is :laugh2:

ausjack

Well that could have been a fun game Uni :)
Here's the dot I was talking about, tinny little bloody thing so I don't worry about anything really small any more but will keep you all posted as to what I find :winkextra:



Oh and they also have the usual nose, chin and hair cuds so far :ok:
A wise person knows there is something to learn from everyone.

Fulvio

Quote from: 'ausjack' pid='43657' dateline='1394601194'Oh and they also have the usual nose, chin and hair cuds so far :ok:

Well of course.. goes without saying. :)

Not seen that on the top of the 2 before.. usually its the right of the 0.

Good one, AJ.
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

ausjack

here's another for ya's 2013 cud on roos foot, very common in other years as well :)
A wise person knows there is something to learn from everyone.

ausjack

Ok ok so here's a few more 2013's I just found, just for Fulvio :winkextra: as he's to slack to post pic's to show me what to look for :mocking: So here we have shoulder cuds and yes more Mr Squiggles



and this one has tinny little one's all over it but really hard to get a good pic sorry :(


I suppose I should go and tidy up so the place doesn't look like a bomb site :)
A wise person knows there is something to learn from everyone.

Unicorn


ausjack

are they die cracks or what??????????
A wise person knows there is something to learn from everyone.

ausjack

Ok just finish the bag and found a few more so here they are,
82 ok nick

another 85 taking the count to about 7 now I think, will have to suss it out :)

I think this might be coldshut but not sure sorry and 75

all in one 2010 three zit queen, head, nearly in nose and cheek :winkextra:
A wise person knows there is something to learn from everyone.

Fulvio

Quote from: 'ausjack' pid='43729' dateline='1394681036'I think this might be coldshut but not sure sorry and 75

Yup. Impressive. See the ding that knocked it loose?
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

ausjack

Thanks Fulvio, I have found heaps of small marks like this but this is the biggest I have found, might have to keep one or two :) And nah can't see any marks or raised bits around the hole, just a hole and the rim is ding free
A wise person knows there is something to learn from everyone.

ausjack

Ok been doin some 20's now and found this "THING" that looks like someone might have actually tried to weld it, who knows but it's different..and NO it wasn't me :laugh2:


A wise person knows there is something to learn from everyone.

Fulvio

Quote from: 'ausjack' pid='43809' dateline='1394748847'someone might have actually tried to weld it,

Yeah, those holes look like arc pits. Definitely PMD.
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW