I found one too! A 'Larena' Coin

Started by JeffH, October 25, 2013, 03:27:45 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

JeffH

I have just found one of those 50¢ with the partial edge "milling". I think they have had a mention in the forum but can't find the thread. {Moderators; feel free to shift this post to an existing thread if it is pertinent.} I know it got quite a run on CCF.
Does this "error" have a name? If not....drum roll, I propose... "The Larena".
Hard little blighter to get a decent picture of.


Some comments;
•Definitely PMD. Displaced metal on the face adjacent is a sure indicator
•The grooves are much bigger than milling on other coins so, not caused by interaction with another coin.
•No sign of any marking on the opposite side so not from being clamped in a vice, or similar.
•The edge of the marking is an arc of a circle (approximately 35mm diameter on my circle gauge but not long enough to get an accurate measurement).
•Pattern is relief not incused (as coin edge milling usually is).
•Numbers of these have been reported so the cause of the damage is not unique.

And, what is the cause?
(Sorry, no drum roll) I don't know!
My speculation is some type of coin handling mechanism/machinery.
More information is required.
Thinking is dangerous, it makes you think. That\'s why many people avoid it.

Unicorn

Good reporting work ..... CSI ! ...... (Coin Scrape Investigation ....)

That's quite a few with the Larena effect now. (Am yet to get one myself).

Nevol

There's a bit about it in this thread, but I don't think it's worth moving this there as it's mostly about Pre-Decimals. :  http://www.australian-coins.net/showthread.php?tid=902

We need a thread with something specific in the title to ID it as the "Larena Thread"  

I don't know if I can alter the title of threads started by other members. Well, it turns out I can, so I did.

Nice find Jeff and great job of describing it. :biggrin:
A Platypus is a duck designed by a committee ( anon)

JeffH

Now all we need is to add "© ACF 2013" and we have it all covered. :diablo:
Thinking is dangerous, it makes you think. That\'s why many people avoid it.

Fulvio

Quote from: 'JeffH' pid='32194' dateline='1382677065'I propose... "The Larena".

Larena? Sorry, I fail to get the connection...

Also, you missed one point... that it happens to random coins of all different years.

I'd love to know what machine is doing this to the poor blighters.
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

Ozcoins

Quote from: 'Fulvio' pid='32251' dateline='1382698784'Larena? Sorry, I fail to get the connection...


The reference is to a thread on CCF where Larena posted about a coin/coins like this and thought they were mint errors.

Others said they were PMD, but that point of view was not accepted.

She later posted about someone using the word "bubble" to do with a 50c coin, and was claiming copyright to the term.

Fulvio

Quote from: 'Ozcoins' pid='32260' dateline='1382703799'She later posted about someone using the word "bubble" to do with a 50c coin, and was claiming copyright to the term.

Ohhhhh... HER! :dodgy: OK, I get it now. LOL
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

robbiegal

I have one , maybe 2 pennies with weird patterns on the edges towards the rim - early years penny
and my personal opinion is that is was struck that way
other reckon it's PMD

I could post a pic & add my summations but i'd risk being off topic

JeffH

Hey Robbie,
It's my topic and you can put here  any strange rims that you want to.
I don't mind a bit of meandering as long as we don't stray too far.
We can always find our way back later.
[Or start a new thread if you think it warrants.]
Thinking is dangerous, it makes you think. That\'s why many people avoid it.

robbiegal

I just think that there are certain bits of machinery errors that are pretty consistent
just like the denticle patterns that show up decade after decade - even after the changeover to decimals
ps
started a pre-dec thread - asking about my odd edge error coins

Nevol

A Platypus is a duck designed by a committee ( anon)

Robster

How funny.!  I shall rename it "Proctologist's Pet Peeve". The main question is has it improved 'em or rectum.?? :blackeye:
\"Everything in moderation, including moderation\".

Nevol

QuoteThe main question is has it improved 'em or rectum.??
:biggrin: :D :haha: :laughingneqw::laugh2: :mocking:
A Platypus is a duck designed by a committee ( anon)

Fulvio

Prickling cuds???? :laughingneqw:

Even if the name made sense, face cuds are not at all rare. :dodgy:
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

markn

Quote from: 'Robster' pid='34925' dateline='1384905384'How funny.!  I shall rename it "Proctologist's Pet Peeve". The main question is has it improved 'em or rectum.?? :blackeye:

She seems to be finding piles of errors now.  Plus she's rather anal about naming each one of them differently.
Founder: Australian Coin Forum
The Australian Coin Collecting Blog