Should I slab my 'dollar mule'?

Started by Ozcoins, October 22, 2013, 12:52:51 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Ozcoins

I am trying to decide if I should slab the 'mule' I found.
I am interested in people's ideas on this.

markn

Quote from: 'Ozcoins' pid='31811' dateline='1382408571'I am trying to decide if I should slab the 'mule' I found.
I am interested in people's ideas on this.

Depends entirely on the grade.  A common from circulation mule might get $400-$500 raw on eBay almost regardless of the condition.  If you got it graded up and it came back an AU53 or better you will most likely get more for it.
Founder: Australian Coin Forum
The Australian Coin Collecting Blog

Goldseeker

I have been tossing with the idea to have all my remaining mules slabbed but a couples of things are against this idea.   These are:

1.   Cost; and
2.   A place to store the slabbed coins.

As a result I am still tossing up with the idea.
Message rec\'d from Jens Coins 18 Jul 23: 
Bruce Mansfield passed away today 18 Jul 2023 – Acute Myeloid Leukemia


stevo1962

Quote from: 'Ozcoins' pid='31811' dateline='1382408571'I am trying to decide if I should slab the 'mule' I found.
I am interested in people's ideas on this.

Post some photos so we can estimate the grade.I have intensions of slabbing my mules that are EF or better and the value would certainly
be enhanced at that level
It\'s not about who you know it\'s about what you know

Fulvio

Quote from: 'Goldseeker' pid='31820' dateline='1382410104'1.   Cost; and
2.   A place to store the slabbed coins.

Which are pretty big negatives. Not only to the slabbing, but to buying slabs.
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

lacey

Quote from: 'Goldseeker' pid='31820' dateline='1382410104'I have been tossing with the idea to have all my remaining mules slabbed but a couples of things are against this idea.   These are:

1.   Cost; and
2.   A place to store the slabbed coins.

As a result I am still tossing up with the idea.

give them to me.  I don't have any and it will solve your problem.  I promise I will give them a lovely new home I will look after them 4 ever

Ozcoins

Quote from: 'stevo1962' pid='31827' dateline='1382411190'
Quote from: 'Ozcoins' pid='31811' dateline='1382408571'I am trying to decide if I should slab the 'mule' I found.
I am interested in people's ideas on this.

Post some photos so we can estimate the grade.I have intensions of slabbing my mules that are EF or better and the value would certainly
be enhanced at that level

There is a photo under 'my lucky day' topic.
After looking at it, the photo is probably not good enough to work out the grade.
I might try to get a better photo to post here later.

markn

Quote from: 'Fulvio' pid='31834' dateline='1382411947'
Quote from: 'Goldseeker' pid='31820' dateline='1382410104'1.   Cost; and
2.   A place to store the slabbed coins.

Which are pretty big negatives. Not only to the slabbing, but to buying slabs.

I see having a coin slabbed as having a two fold purpose.  The first is to protect the coin better.  The second is to enhance any potential resale value.  If protection is your primary motive then the extra space taken up could be a careful consideration.  Because getting a lot of low value coins is not only expensive it can also take up a whole lot of space.

But if enhancing future resale is your primary motive?  Well you can easily get the BEST coins in your collection slabbed (which might only be 20-40 coins) and have the extra space EASILY paid for by the value adding you perform.  Let's take the mule as an example.  Given that the real value difference between a raw AU55 mule ($450-500) and a slabbed AU55 mule ($800-$1100) is so large the cost of the extra space is FAR out-weighed by the extra value.  

In Goldy's case he has 30 odd mules, surely the extra value he'd add to them getting them graded would pay for a bigger SDB MANY times over.  You don't have to put them in slab boxes, you can lay them flat, stack them, put rubber bands around them.  Do whatever you like to make them fit.  And if Goldy has all of his mules in a press in album there's a lot of dead space that's using up already.

I guess it all comes down to your priorities.  To me finding the right coin and buying it is just one step.  The next step is storing them properly and the final step is the  preparation for their (inevitable) disposal.  To me, many collectors put a huge amount of effort into the first step, put little thought into the second, and none at all into the final one.  Yet all three are an integral part of owning a coin.
Founder: Australian Coin Forum
The Australian Coin Collecting Blog

stevo1962

Quote from: 'Ozcoins' pid='31837' dateline='1382412928'
Quote from: 'stevo1962' pid='31827' dateline='1382411190'
Quote from: 'Ozcoins' pid='31811' dateline='1382408571'I am trying to decide if I should slab the 'mule' I found.
I am interested in people's ideas on this.

Post some photos so we can estimate the grade.I have intensions of slabbing my mules that are EF or better and the value would certainly
be enhanced at that level

There is a photo under 'my lucky day' topic.
After looking at it, the photo is probably not good enough to work out the grade.
I might try to get a better photo to post here later.

 Looks to be probably VF  or VF+ from the photos so might make AU50 which to me would be on the cusp of slabbing potential
It\'s not about who you know it\'s about what you know

Fulvio

Quote from: 'markn' pid='31838' dateline='1382412979'The first is to protect the coin better.  The second is to enhance any potential resale value.

Leaving aside the second, which has been argued to death and is probably moot for collectors anyway, that leaves protection.

What does a slab offer? Mechanical rigidity and environmental protection.

Rigidity is pretty pointless for lumps of metal. Even impact resistance is of low value since there's not a lot of rough handling by most collectors.

So it comes down to excluding air and the contaminants it carries. And given that any sealed inert container does that job equally well, I fail to see the advantage of a big block of plastic over a polyethylene or polypropylene bag, flip or page.

But there's a third aspect to this. Bragging rights. Likely closely related to value, of course. Clearly there are some who love collecting packaging, and this is probably a high priority for them.
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

stevo1962

Quote from: 'Fulvio' pid='31843' dateline='1382414224'
Quote from: 'markn' pid='31838' dateline='1382412979'The first is to protect the coin better.  The second is to enhance any potential resale value.

Leaving aside the second, which has been argued to death and is probably moot for collectors anyway, that leaves protection.

The only reason that I would slab a coin is to enhance the value.If you collect coins for the sake of collecting then slabbing will just increase your costs.Although if you decide to slab these coins and leave them to your heirs then they would enjoy the added value .Differnet strokes for different folks that's all it is
It\'s not about who you know it\'s about what you know

markn

Quote from: 'Fulvio' pid='31843' dateline='1382414224'Rigidity is pretty pointless for lumps of metal. Even impact resistance is of low value since there's not a lot of rough handling by most collectors.

Wrong.  People drop coins all the time.  Drop things on coins.  Drop things on coins in holders.  Scratch coins in holders.  Drop coins in holders out of album pages, boxes or whatever.

There are other holders that give some impact protection too but standard sized slabs (PCGS NGC) have some advantages over these because they ARE easier to store.  Either in the custom boxes or stacking them.  Capsules, for example, look great but are an absolute pain to store sensibly.
Founder: Australian Coin Forum
The Australian Coin Collecting Blog

emu666

Quote from: 'Ozcoins' pid='31811' dateline='1382408571'I am trying to decide if I should slab the 'mule' I found.
I am interested in people's ideas on this.


Have you had your other coins independently graded?
If so, then you probably should.

If you haven't, then there is no point in it.

I still have the first mule I found. It is in a 2 x 2 and labelled "1. 7/5/04".

markn

Quote from: 'emu666' pid='31853' dateline='1382421430'If you haven't, then there is no point in it.

Why?  A mule you find for $1 is (in my opinion) a great coin to be your first in a slab.
Founder: Australian Coin Forum
The Australian Coin Collecting Blog

Cooper S

\"Its only worth how much you want it.\"