Can you see it?

Started by markn, October 14, 2013, 10:24:24 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

ausjack

mint your own in perth that has already been pressed..umm sounds fair.

So you have p holes in the snow..I know what it's like mate :)
A wise person knows there is something to learn from everyone.

robbiegal

Quote from: 'markn' pid='30904' dateline='1381739303'
Quote from: 'robbiegal' pid='30885' dateline='1381736751'**giggle**

mark does have very nice charming eyes, as a matter of fact

I am not sure how you can see them.  They are beady and always squinting.

bashful, aren't we??

purplepennyhunter

I think the dealer we got this off just found his in his dealer allocation when he got home and inspected them later. In other news I was there pressing my own coins completely independent of this incident.
Co-Founder Australian Coin Forum

ausjack

can you tilt these things like you can the old pinnies :)
A wise person knows there is something to learn from everyone.

markn

Quote from: 'ausjack' pid='30956' dateline='1381742671'can you tilt these things like you can the old pinnies :)

I think the RAM would get very upset at you if you tried to tip their press like a cow.
Founder: Australian Coin Forum
The Australian Coin Collecting Blog

markn

Quote from: 'robbiegal' pid='30949' dateline='1381742267'bashful, aren't we??

No.  I just have beady squinty eyes.
Founder: Australian Coin Forum
The Australian Coin Collecting Blog

trout

QuoteNo. I just have beady squinty eyes.
NO worries, I don't think for one minute that you or PP  have a squinty outlook  tho Mate  :yahoo:
Aim well to enjoy life. You only get One shot at it.
Illegitimi non carborundum

Fulvio

Quote from: 'markn' pid='30967' dateline='1381744017'I think the RAM would get very upset at you if you tried to tip their press like a cow.

Sing along now....

"Oh, its a long way.. to Tip-a-Coin-Press..." :dodgy:
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

ausjack

Quote from: 'markn' pid='30967' dateline='1381744017'
Quote from: 'ausjack' pid='30956' dateline='1381742671'can you tilt these things like you can the old pinnies :)

I think the RAM would get very upset at you if you tried to tip their press like a cow.

Well I'll have to come down and go to a show with ya and we can have a go..you just reminded me of this ad that cracks me up and I'm told I'm a little like the bloke :laugh2:

doh here the link sorry http://www.youtube.com/watch?v=N2nMRPAZSQU

in attitude that is not looks ;)
A wise person knows there is something to learn from everyone.

robbiegal

Quote from: 'markn' pid='30968' dateline='1381744054'
Quote from: 'robbiegal' pid='30949' dateline='1381742267'bashful, aren't we??

No.  I just have beady squinty eyes.

ok
you win
i'll agree with you mr beady squinty eyes

trout

I have never seen or met  Markin or PP but I can assure  you they are STOUSH people .
Actions speak louder than words and IMHO these pair are AWSOME regardless of their eyes :ok:
Aim well to enjoy life. You only get One shot at it.
Illegitimi non carborundum

purplepennyhunter

Back to the topic in hand. Mark named this topic can you see it, I think he should have named it can you C it. Here's the second C under the dino I took tonight.
Co-Founder Australian Coin Forum

Fulvio

Thanks for that, PP. It clearly shows something that was bugging me about this.

Given that the MM die is an incused C on a raised circle, how come the underlying coin doesn't seem to reflect this, particularly around the centre of the C? It should all be flattened like the edge of the girder in the top section. Clearly there is sufficient pressure, as it obliterated one and two half rivets, so why not the rest?
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

markn

Quote from: 'Fulvio' pid='31129' dateline='1381839552'Thanks for that, PP. It clearly shows something that was bugging me about this.

Given that the MM die is an incused C on a raised circle, how come the underlying coin doesn't seem to reflect this, particularly around the centre of the C? It should all be flattened like the edge of the girder in the top section. Clearly there is sufficient pressure, as it obliterated one and two half rivets, so why not the rest?

It's a raised C in an incuse circle.  Strike pressure was clearly low and the C in the die was not even close to being filled as not even the rivets in the C have been flattened much.
Founder: Australian Coin Forum
The Australian Coin Collecting Blog

Fulvio

Quote from: 'markn' pid='31151' dateline='1381871980'It's a raised C in an incuse circle.

On the coin, yes. The die is reversed. I wouldn't expect the rivets to be flattened. I would expect the spaces between the girders to be, like in the lower right. Yet the triangular section across the C shows no sign of being struck at all.

Just saying it looks odd, that's all.
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW