NZ 1997 5c on smaller copper-clad steel planchet

Started by translateltd, October 15, 2016, 08:04:31 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

translateltd

Curious to know what other countries (besides Norway and NZ) the Mint of Norway was making coins for in 1997.  I was shown a 1997 NZ 5c today that was struck on a bronze-coloured planchet roughly the size of a 1c piece (didn't get the exact diameter, unfortunately) and magnetic.  Since the NZ coins were made in Norway that year I assume the copper-clad-steel planchet must have come from the Norwegian mint too.  Any thoughts based on those admittedly sketchy details?

I've looked on line for an annual report from the MoN but no joy so far.  If anyone has better luck, pse let me know :-)  (Text in either English or Norwegian would be fine.)

Cheers,

Martin
NZ

Fulvio

Earliest report I could find was 2010:

http://www.myntverket.no/myntverket/vedlegg/1DNM-%E5rsrapport-10-en.pdf

No mention of mintages however.

PS: I DO like their rolls. Very pretty. :)
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

purplepennyhunter

I have some British coins on wrong planchets I got for my birthday that I am trying to figure out what wrong planchets. All on magnetic copper clad steel planchets but from the Royal Mint. Good luck! Sometimes you just gotta get Krause out and relax on the couch!

BTW you need a weight on that coin.


This site (the advanced search) can be helpful if you have some but limited info.
Co-Founder Australian Coin Forum

translateltd

Thanks - yes, the minimal detail I provided was all I had at the time.  Here's more received in the meantime from the owner.  The nearest match he has found in KM is a South African 1 cent.  Yes, they were made at different mints, but at a pinch, someone could have tossed a foreign coin in the hopper of blanks for a laugh.  My follow-up question was to check if there's even a trace of detail from an underlying coin that might support this theory.

QUOTE
The 5 cent coin measurements are
16.2-16.4mm & 1.2 mm thick  (but squashed a bit as it would have spread as hit by the dies (is my theory lol)
Weight 1.503 grams

Compare to the South African 1997 1 cent

Metal Copper plated Steel
Weight 1.5 grams
thickness 1.3mm
Diameter 15.mm
UNQUOTE

Quote from: 'purplepennyhunter' pid='100091' dateline='1476689407'I have some British coins on wrong planchets I got for my birthday that I am trying to figure out what wrong planchets. All on magnetic copper clad steel planchets but from the Royal Mint. Good luck! Sometimes you just gotta get Krause out and relax on the couch!

BTW you need a weight on that coin.

Fulvio

Quote from: 'translateltd' pid='100092' dateline='1476689773'Yes, they were made at different mints, but at a pinch, someone could have tossed a foreign coin in the hopper of blanks for a laugh.

More likely the problem originated with the planchet manufacturer. A stray planchet in the wrong barrel shipped to the other side of the world is more likely than someone risking his job for a laugh. :angel:
http://fulvio55.altervista.org/ - Decimal Mintages and Polymer Notes PDFs
Doge: DG8r9JJnWCHVvd1iG4BJeJMj5g1reYTnSc - BTC: 1FFnNxMDNCnQEjHrh9EhnHZoDMjkbf1seW

purplepennyhunter

The Royal Mint did and does supply blanks to other countries -did they supply blanks to the South African Mint and the Norway Mint?
Co-Founder Australian Coin Forum

translateltd

That's plausible - the BRM annual reports for 96/97 and 97/98 might provide the answer we need in that case.

Quote from: 'purplepennyhunter' pid='100097' dateline='1476690630'The Royal Mint did and does supply blanks to other countries -did they supply blanks to the South African Mint and the Norway Mint?