Just won this coin and would be interested in grading
opinions thanks
[attachment=1437]
[attachment=1436]
Look nce. Ef-gEF i reckon. Ive been after a 1913 for ages so im very jealous of that one. Nice pick up.
EF-AU 50 nice picup mate,sweet coin.
1913s are always a bit weak on the obverse.
This one is almost UNC in my opinion.
Quote from: 'echidna' pid='9760' dateline='1363421876'1913s are always a bit weak on the obverse.
This one is almost UNC in my opinion.
Yes I've seen a slabbed example that has virtually the same obverse graded at AU58
Quote from: 'echidna' pid='9760' dateline='1363421876'1913s are always a bit weak on the obverse.
This one is almost UNC in my opinion.
SERIOUSLY, I doubt that ?
AU50 is the best this could be IMHO which = a EF:good:
a very nice coin there Steveo - i'd be happy to tuck that KGV into one of my albums
nice gloss to the surfaces & remaining lustre which is an instant EF
the rest is then the 'art of it'
knowing the year, the dies, strike types etc
obverse rims are a tad bumpy so I'd be inching towards a safe a/unc - a/unc+
but having said my waffle, I am much more confident with having a go at grading the 1940's copper coins - they are my particular interest for these fabulous grading challenges - hence why your 1946 was soooo much fun for me to have a go at grading
cheers Robbie
Quote from: 'robbiegal' pid='9783' dateline='1363431265'a very nice coin there Steveo - i'd be happy to tuck that KGV into one of my albums
nice gloss to the surfaces & remaining lustre which is an instant EF
the rest is then the 'art of it'
knowing the year, the dies, strike types etc
obverse rims are a tad bumpy so I'd be inching towards a safe a/unc - a/unc+
but having said my waffle, I am much more confident with having a go at grading the 1940's copper coins - they are my particular interest for these fabulous grading challenges - hence why your 1946 was soooo much fun for me to have a go at grading
cheers Robbie
Yes the 1913 penny was a nice pickup for $83 but I had to go to Rotterdam in the Netherlands to get it
That's one thundered years old now.
Nice coin
Coin arrived today and I still think it's aUNC
[attachment=1566] [attachment=1565]
From the first photo I would've gone with AU53 but from the last set of photos I'd say AU58.
Quote from: 'wwwww' pid='10950' dateline='1364445853'From the first photo I would've gone with AU53 but from the last set of photos I'd say AU58.
Thanks Walter I was quietly confident and hoping that it was AU58
Sharp legends and devices show only a trace of wear on the highest points. There must be some remaining mint luster.
AU 50 old mate.
sorry Walter I tend to disagree with your AU58 grade on this coin.
AU50 -55 simply because most of the lustre has gone on this coin.
To get a 58 grade most of the lustre should be there IMHO :ok:
Just my opinion but it is my Honest opinion :good:
When grading circulated coins you measure wear, mint lustre indicates an absence of wear but an absence of mint lustre doesn't necessarily indicate wear. Lustre can be lost to residue filling, environmental damage or non-circulation forms of wear (such as cleaning).
While on silver the level of environmental damage required to disrupt lustre usually renders the coin undesirable anyway, on copper based alloys environmental damage can at times hide lustre through relatively normal exposure. The key (assuming details are at an AU level) is to look for a relative difference between the protected surfaces and the exposed surfaces as wear characteristically affects the exposed surfaces. If the protected surfaces show no lustre, then you're never going to have lustre in the exposed surfaces so you can't really use the absence of lustre as an indication of wear.
The other important cause is residue filling. Lustre is caused by light reflecting off tiny grooves, if these grooves are filled with a containment, lustre will be subdued or hidden. This doesn't affect the grading of a coin but it does make it difficult to grade from lustre. As with environmental damage, comparing the lustre in the exposed surfaces to those in the fields is a better measure.
Quotecomparing the lustre in the exposed surfaces to those in the fields is a better measure.
this is exactly how I came about my grade :good:
On the obverse of this coin it has lustre in the fields but none on the high points.
On a KGV coin for an AU58 I would expect to see at least some remaining lustre in the kings beard.
I may be grading my coins too hard, but that is the way I treat all my own coins :ok:
First thing I look at when I grade is not the actual coin rather the date.
Some dates are notoriously weak and 1913 pennies are a good example.
Keep the date/strike in mind when grading Aussie coins !
The coin is aUNC.
Quote from: 'trout' pid='10976' dateline='1364506634'Quotecomparing the lustre in the exposed surfaces to those in the fields is a better measure.
this is exactly how I came about my grade :good:
On the obverse of this coin it has lustre in the fields but none on the high points.
On a KGV coin for an AU58 I would expect to see at least some remaining lustre in the kings beard.
I may be grading my coins too hard, but that is the way I treat all my own coins :ok:
Sorry that was supposed to read, 'comparing the lustre in the unexposed surfaces to those in the fields'. Silly me, the fields are exposed surfaces! The easier pair to compare are the surfaces with the legends and the open fields.
Either way, I don't think either set of photos give much of an indication about lustre (it's difficult to capture lustre on copper coins), I was speaking in a general context.
Quote from: 'wwwww' pid='11035' dateline='1364599996'Quote from: 'trout' pid='10976' dateline='1364506634'Quotecomparing the lustre in the exposed surfaces to those in the fields is a better measure.
this is exactly how I came about my grade :good:
On the obverse of this coin it has lustre in the fields but none on the high points.
On a KGV coin for an AU58 I would expect to see at least some remaining lustre in the kings beard.
I may be grading my coins too hard, but that is the way I treat all my own coins :ok:
No worries Walter :good:
This is what I Love about coins, I never stop learning things.
:wavemulticolor:
Sorry that was supposed to read, 'comparing the lustre in the unexposed surfaces to those in the fields'. Silly me, the fields are exposed surfaces! The easier pair to compare are the surfaces with the legends and the open fields.
Either way, I don't think either set of photos give much of an indication about lustre (it's difficult to capture lustre on copper coins), I was speaking in a general context.