Yep, that's right, it's me again flooding the threads! (on a serious note, please tell me if I'm posting too much...)
Can't really tell if this is PMD or a crack in the planchet (it looks very different to lamination peels etc I've had before, but still doesn't quite look like PMD). Any advice?
(http://imgur.com/PXlmWB5.jpg)
:laugh2: mate look at the amount some of us post, your right :winkextra:
Hard to tell from the pic's sorry, if it's sunk in it's more than likely PMD but if it's raised it's a crack.
Oh and well done on getting to the 50 mark :yahoo:
Looking a bit like a cracked planchet but hard to tell 100%. Any sign on the reverse at the same spot?
Quoteplease tell me if I'm posting too much
Not an issue here. Check trout's trout's (https://www.australian-coins.net/member.php?action=profile&uid=19) post count.
Ha didn't even realize about the 50!
The crack is pretty sunken. What's throwing me is the fact it goes right to the rim (lots of PMD cracks I've seen will either stop before the rim or go through it). But it was probably too much to ask to find another error :)
Quote from: 'JeffH' pid='92614' dateline='1468632423'Looking a bit like a cracked planchet but hard to tell 100%. Any sign on the reverse at the same spot?
Sorry Jeff, missed your post. Here's a photo of the reverse. I can't seem to see any signs of it when looking at the real thing on the reverse side....
(http://imgur.com/rqIAEAJ.jpg)
Having many flaking coins in my collection, I would be game to say that someone may have gone with your coin with a knife.
The cut from the centre to near the end of the gouge looks to be to straight to be anything else.
Just my opinion.
Quote from: 'Goldseeker' pid='92618' dateline='1468633847'Having many flaking coins in my collection, I would be game to say that someone may have gone with your coin with a knife.
The cut from the centre to near the end of the gouge looks to be to straight to be anything else.
Just my opinion.
Fair enough, I was leaning towards that conclusion myself. Still interested in other opinions. I'll still hold onto it, interesting nonetheless!
Quote from: 'tooloot' pid='92600' dateline='1468623335'it looks very different to lamination peels etc
Exactly. I'd call it as PMD, based on the tapering straight cut that just stops, and the displaced metal near the rim. Plus its at 90° to the surface.
Cold shuts which run through, rather than along the metal don't look anything like that. They leave gaping holes in the coin, not this dainty thing. And when they run at a shallow enough angle to produce a surface line, it tends to be flaky, like a rip not a cut.
If you've got a scope, try and get a look into the cut though. If its a flaw, it will have rough surfaces. Smooth, and its definitely a cut.
Quoteplease tell me if I'm posting too much
Not an issue here. Check trout's trout's post count.
I just noticed that I have gone over the 10,000 post mark :blush:
Well done trout :yahoo: but does that mean you talk too much (https://www.youtube.com/watch?v=s2B3gPY5LRg) :mocking: :angel:
Quote from: 'trout' pid='92637' dateline='1468643604'I just noticed that I have gone over the 10,000 post mark
BLABBERFINGERS! :P
You pair have 13,360 posts between the both of you and you recon I talk too much :angel::laugh2:
Quote from: 'trout' pid='92697' dateline='1468692604'You pair have 13,360 posts between the both of you
And your point is...? Can we help it if we are neverending wellsprings of Numismatic excellence and well-rounded awesomeness? Oh, and modesty... don't forget the unbounded modesty. :angel:
"unbounded modesty" eh.
Do you have any evidence of that?
Quote from: 'JeffH' pid='92701' dateline='1468696252'Do you have any evidence of that?
No, you'd have to speak to AJ about that.. he's in charge of evidence. Witty insights is my department. :angel:
:laugh2: you lot crack me up :friends:
Yes it takes two of us and we're only JUST over your total trout :blink: Tis all good as it would be quiet without you :winkextra:
Yes I totally agree Fulvio we can't help it :angel: and I know I'm just excellent :yahoo: :D
Come on Jeff you know I am and it's ok as you know I love you too sweetheart :blush2: :)
Quote from: 'Fulvio' pid='92699' dateline='1468695313'Quote from: 'trout' pid='92697' dateline='1468692604'You pair have 13,360 posts between the both of you
And your point is...? Can we help it if we are neverending wellsprings of Numismatic excellence and well-rounded awesomeness? Oh, and modesty... don't forget the unbounded modesty. :angel:
F.I.G J.A.M eh :angel:
Quote from: 'trout' pid='92733' dateline='1468719934'F.I.G J.A.M eh :angel:
Yup. :dodgy:
Oh, and if you happen to have some Fig Jam, I wouldn't mind some, the bloody birds, possums and wombats ((!!??!!) strip our tree bare every year. :(
Quote from: 'Fulvio' pid='92743' dateline='1468727188'Quote from: 'trout' pid='92733' dateline='1468719934'F.I.G J.A.M eh :angel:
Ah, I know who you are now Fulvio - Nathan Buckley!
Pedro
Plenty of home made fig and (still some left) blackberry jam here. Also plum and apricot as well as assorted others and preserves.
Better than most you buy at the supermarkets. (Are we off topic?)
Quote(Are we off topic?)
Way out there Mate:angel:
Quote from: 'JeffH' pid='92757' dateline='1468748484'Plenty of home made fig and (still some left) blackberry jam here. Also plum and apricot as well as assorted others and preserves.
Better then most you buy at the supermarkets. (Are we off topic?)
yum
yes we are off topic
the hubby madea small batch of fabulous fig jam this year
when the daughter visits she tries to fleece the precious jars to no avail mind you ha ha
Quote from: 'JeffH' pid='92757' dateline='1468748484'(Are we off topic?)
No further than usual. ;)
I'll definitely stop by when I can, and bring my appetite! ;)