Australian-Coins Forum

Australian Coins, Banknotes and Exonumia => Australian Errors and Varieties => Topic started by: tooloot on July 13, 2016, 10:57:47 PM

Title: Straight Partial Collar
Post by: tooloot on July 13, 2016, 10:57:47 PM
Thanks again (in advance) for the advice.

I think I found a straight partial collar on this 1993 $1 coin, but the smooth part of the collar (forgive my lack of proper terminology - the part of the collar where the milling should be) is quite small/thin compared to others I've seen. Any advice on what I might have?

Apologies if the photos are quite large. I did my best to reduce the size

(http://imgur.com/0FFnmAd.jpg)
(http://imgur.com/nj1cmUz.jpg)
Title: RE: Straight Partial Collar
Post by: ausjack on July 13, 2016, 11:49:37 PM
Well done TL, your on fire :good: Here's a link for you on the out of collar or partial collar and straight partial collar.
http://www.australian-coins.com/error-coins/out-of-collar-or-partial-collar-coin-errors/

(http://i68.tinypic.com/kbves8.jpg)
(http://i66.tinypic.com/v5fhuc.jpg)
Title: RE: Straight Partial Collar
Post by: trout on July 13, 2016, 11:59:08 PM
Goods eyes, Well done Mate :yahoo:
Title: RE: Straight Partial Collar
Post by: tooloot on July 14, 2016, 05:33:37 AM
It's been a good week! Thanks for the link - I had used that previously :) any info out there on value for these bad boys (it's not in great condition but still interested)?
Title: RE: Straight Partial Collar
Post by: ausjack on July 14, 2016, 08:53:29 AM
No idea sorry but would be $50+ depends on how many people would want it on the day as it might go over $100 it's hard to say.
Title: RE: Straight Partial Collar
Post by: tooloot on July 14, 2016, 08:57:44 AM
Quote from: 'ausjack' pid='92516' dateline='1468452209'No idea sorry but would be $50+ depends on how many people would want it on the day as it might go over $100 it's hard to say.

Thanks AJ. The market is a bit like that these days. I'm in no rush to get rid of it though, gonna tuck it away for now :)
Title: RE: Straight Partial Collar
Post by: ausjack on July 14, 2016, 09:30:29 AM
Your getting a nice little collection going there :good:
Title: RE: Straight Partial Collar
Post by: tooloot on July 14, 2016, 10:39:01 AM
Sure am! Stockpiled about 50 $1 cuds so far as well :) now if only I could find a clipped coin....
Title: RE: Straight Partial Collar
Post by: ausjack on July 14, 2016, 11:06:46 AM
Now that one will be a bit harder :winkextra:
Title: RE: Straight Partial Collar
Post by: Pedro on July 14, 2016, 02:23:24 PM
Well done Tooloot! I think I would have missed that - too busy looking for cuds.

Pedro
Title: RE: Straight Partial Collar
Post by: Fulvio on July 15, 2016, 12:14:37 AM
I definitely would have missed that one.

Niiiice pickup! :)

Now.. go give it a bath in Acetone to get rid of those nasty fingerprints before they eat your coin. :angel:
Title: RE: Straight Partial Collar
Post by: Ozcoins on July 15, 2016, 11:23:27 AM
Looking at the right side of the first photo, it looks the bottom edge is indented.
Is that correct?
Title: RE: Straight Partial Collar
Post by: Fulvio on July 15, 2016, 05:11:04 PM
Quote from: 'Ozcoins' pid='92562' dateline='1468547607'Looking at the right side of the first photo, it looks the bottom edge is indented.
Is that correct?

Looks that way. In fact, it kinda looks like the collar wasn't straight, but very slightly tilted.

Need. More. Pics! :angel:
Title: RE: Straight Partial Collar
Post by: Ozcoins on July 15, 2016, 07:21:43 PM
Would a collar error ever have an indent?
I would expect that they would always have metal flowing outwards past the collar.
I remember someone posting what they thought was a collar error a while ago which I think actually had some of the rim machined off.
The indent on this picture reminded me of that.
I agree with Fulvio. More pics would be good.
Title: RE: Straight Partial Collar
Post by: tooloot on July 15, 2016, 08:40:49 PM
By popular demand, here's some more photos - I took photos of each grouping of milling, starting with the top grouping and moving clockwise (honest, I tried reducing the size of the photos - sorry for the huge ones again!). Thoughts?



(http://imgur.com/kukul7h.jpg)
(http://imgur.com/hH4h8Zt.jpg)
(http://imgur.com/tdofOrl.jpg)
(http://imgur.com/cO3rCKl.jpg)
(http://imgur.com/qs2fFIj.jpg)
(http://imgur.com/yfFmgi0.jpg)
(http://imgur.com/nD8vhgP.jpg)
Title: RE: Straight Partial Collar
Post by: ausjack on July 15, 2016, 08:59:33 PM
I think what put Fulvio and Oz off was that it wasn't bulging out like on the $2 Mark put on his blog but I think it looks a little funny due to it being a thin one and maybe being in circulation from 1993 has added to it thinning but if you look at where the reeding should be you can tell it hasn't been machined because of the angled bits, thanks for the closer pic's TL. I still think it's the goods it's not a dramatic collar error :good:
Title: RE: Straight Partial Collar
Post by: tooloot on July 15, 2016, 09:09:43 PM
Quote from: 'ausjack' pid='92577' dateline='1468582173'I think what put Fulvio and Oz off was that it wasn't bulging out like on the $2 Mark put on his blog but I think it looks a little funny due to it being a thin one and maybe being in circulation from 1993 has added to it thinning but if you look at where the reeding should be you can tell it hasn't been machined because of the angled bits, thanks for the closer pic's TL. I still think it's the goods it's not a dramatic collar error :good:

Thanks mate. I'm chalking it up as a win! The coin in general is quite beat up (AKA circulated to the s**t), but I'm still happy with my noodling this week!
Title: RE: Straight Partial Collar
Post by: Fulvio on July 15, 2016, 09:14:25 PM
Quote from: 'tooloot' pid='92576' dateline='1468581049'Thoughts?

(http://fulvio.jovianprojects.com.au/coins/forum/StraightCollar.jpg)

OK, first of all, apologies for the quick and dirty edit. I made no attempt to resize things, so some of my comments may be slightly off.

1. Yes, its genuine.
2. Its had a hard life. What year was this again?
3. The depth of the partial collar does seem to vary slightly. So its very slightly tilted I think (perhaps optical illusion).
4. There is some slight rounding of the edge.. nothing we haven't all seen a million times though.

If it was mine, I'd happily take it to the next MNS meeting (topic happens to be errors and varieties) and show it off.

If it was for sale, I'd consider making an offer. Given that I just bought a 10% offset 2004 10ยข at the MNS auction last night for $10 (double rim at the top, almost no rim at the bottom), I'd start at that price and go maybe 2 or 3 times that if I had to. Depending on condition of the coin, of course.

Again, well spotted. I doubt I would have noticed it.

Quote from: 'tooloot' pid='92578' dateline='1468582783'Thanks mate. I'm chalking it up as a win! The coin in general is quite beat up (AKA circulated to the s**t), but I'm still happy with my noodling this week!

And so you should be. Wouldn't it have been nice to pull this out of a mint bag or roll in UNC back in the day? :angel:
Title: RE: Straight Partial Collar
Post by: tooloot on July 15, 2016, 09:25:39 PM
Thanks Fulvio - the picture edit makes it easier to see! At $10-$20, I'll hold onto it for now!

Any information/link to the next MNS meeting? Never been but interested!
Title: RE: Straight Partial Collar
Post by: Fulvio on July 15, 2016, 10:17:22 PM
Quote from: 'tooloot' pid='92580' dateline='1468583739'At $10-$20, I'll hold onto it for now!

It wasn't an offer. Just what I would consider reasonable if I was doing the buying. ;)

QuoteAny information/link to the next MNS meeting? Never been but interested!

https://www.facebook.com/groups/1430907327204766/ is our Facebook group, which has the upcoming events.

Next meeting is a month away. Then we'll be volunteering at the ANDA show, and then we've got our own show at Mitcham in October. Members are invited to enter displays for competitions at both shows.
Title: RE: Straight Partial Collar
Post by: tooloot on July 15, 2016, 10:23:05 PM
Quote from: 'Fulvio' pid='92582' dateline='1468586842'It wasn't an offer. Just what I would consider reasonable if I was doing the buying

I figured as much. More saying its a great addition to my own collection so no rush to try and sell it if it's not contributing to the mortgage! :)

QuoteNext meeting is a month away. Then we'll be volunteering at the ANDA show, and then we've got our own show at Mitcham in October. Members are invited to enter displays for competitions at both shows.

Excellent thanks! I'll check it out.
Title: RE: Straight Partial Collar
Post by: ausjack on July 15, 2016, 10:27:11 PM
Quote from: 'Fulvio' pid='92582' dateline='1468586842'
Quote from: 'tooloot' pid='92580' dateline='1468583739'At $10-$20, I'll hold onto it for now!

It wasn't an offer. Just what I would consider reasonable if I was doing the buying. ;)

And what  if you were doing the selling :angel:

Oh I'm a little :diablo: aren't I :blush2: :grin:

I just can't help myself sometimes :zomby:

If you ever want to sell it TL do a completed listing search on ebay to see what some have sold for and that goes for other coins as well :winkextra:
Title: RE: Straight Partial Collar
Post by: tooloot on July 15, 2016, 10:33:06 PM
Hahaha honestly don't know prices! Been watching a tilted partial collar auction and its up to $200.... ;) A man can dream, can't he?!
Title: RE: Straight Partial Collar
Post by: ausjack on July 15, 2016, 10:37:19 PM
Yes and this is where the grade of the coin comes into it as well, the better the grade the better the premium and also having a couple of people wanting it helps greatly. Uni sold a 50 cent the other week on feebay and did really well and got just over $100.
Title: RE: Straight Partial Collar
Post by: tooloot on July 15, 2016, 10:44:21 PM
Awesome! I know that the condition of my coin will knock off a zero from the price - hence the dreaming part :)
Title: RE: Straight Partial Collar
Post by: Unicorn on July 15, 2016, 10:44:48 PM
Yes it certainly looks the goods, quite unusual being such a fine line. I was happy with my sale, it paid for some paint for my tailgate. :winkextra: which got me through rego. Still have to do the top coats though.
Title: RE: Straight Partial Collar
Post by: Fulvio on July 16, 2016, 01:10:27 AM
Quote from: 'ausjack' pid='92584' dateline='1468587431'And what  if you were doing the selling :angel:

[align=center](http://www.artmarcovici.com/_/rsrc/1440015172940/one-billion/web-obd-4.jpg)

(http://www.rich20something.com/wp-content/uploads/2016/03/Screen-Shot-2016-03-10-at-3.08.45-PM.png)
[/align]
Actually.. you KNOW I don't sell anything. :)

BTW, do yourself a favour and watch this, and the many others in a similar vein:

https://www.youtube.com/watch?v=2I98OMxO-uE
Title: RE: Straight Partial Collar
Post by: ausjack on July 16, 2016, 06:57:01 AM
And you know I won't let the truth get in the way of a good stir :blush2:
Title: RE: Straight Partial Collar
Post by: Goldseeker on July 16, 2016, 11:28:17 AM
tooloot:   I have one that is almost the same as yours.

I just went looking for the scans I put up in my Gallery above but can't seem to find it.

I will get it out later and put up some scans for comparison.

Regardless, a very nice find.

Are you getting plenty of $1 coins from the banks/clubs etc or what?
Title: RE: Straight Partial Collar
Post by: tooloot on July 16, 2016, 02:34:51 PM
Quote from: 'Goldseeker' pid='92619' dateline='1468634297'tooloot:   I have one that is almost the same as yours.

I just went looking for the scans I put up in my Gallery above but can't seem to find it.

I will get it out later and put up some scans for comparison.

Regardless, a very nice find.

Are you getting plenty of $1 coins from the banks/clubs etc or what?

That'd be great, thanks!

Yep my local Westpac has a machine that dispenses rolls of $1's. It's like giving a child the key to an ice cream shop in summer! Can't help myself!
Title: RE: Straight Partial Collar
Post by: Fulvio on July 17, 2016, 03:21:03 AM
Quote from: 'tooloot' pid='92648' dateline='1468645491'It's like giving a child the key to an ice cream shop in summer! Can't help myself!

Well, yes and no...

Armaguard doesn't (for the most part, Brissy seems to be an exception) roll new coin. So if you don't go into the branch to get sacks, you're missing out.

Also, if you happen to be in an area with an older population, you want to get deposited coin before its been sent back for recycling. Why? Because when oldies fall off the perch, the kids take the stash to the bank without any thought to the treasures it might contain. This is also why you want to make friends with the tellers and grab any 'mutes' they might be sending off for destruction.

Oh, and in younger areas with plenty of schools, you get a fair amount of new coin that went from supermarket to tuckshop to bank.
Title: RE: Straight Partial Collar
Post by: tooloot on July 17, 2016, 07:04:40 AM
Quote from: 'Fulvio' pid='92696' dateline='1468691463'Well, yes and no...

Oh my god I feel quite foolish that I didn't know about this! I have gone into the bank before to get a "bag" and they've given me 25 Armaguard rolls.... What specifically should I be asking for? (I live in an area with a very old population. Going to the local supermarket just for milk and bread can be a 4 hour endeavor).

There's a part of me that feels numismatic enthusiasts can't bother the bank tellers... Maybe it's a matter of getting over that :)
Title: RE: Straight Partial Collar
Post by: JeffH on July 17, 2016, 07:12:49 AM
A 'bag' of $1 coins can contain 25 Armaguard rolls -they are returned coins that Armaguard has rolled and repacked. Or it could be 500 loose coins in a 'Coinsafe' or 'Secure-safe' sealable bag the bank has packed ready to return.
My local bank gives the bags to the Bowling Club and the laundromat who deposit full bags. The bank initials the bags to indicate who brought it in so they don't give me one I have returned myself. When they sell me a bag of rolls they ask for them to be returned in the little ziplock bags -for some strange reason they won't give out individual rolls.
Title: RE: Straight Partial Collar
Post by: Pedro on July 17, 2016, 07:30:24 AM
Quote from: 'JeffH' pid='92712' dateline='1468705369'My local bank gives the bags to the Bowling Club and the laundromat who deposit full bags. The bank initials the bags to indicate who brought it in so they don't give me one I have returned myself. When they sell me a bag of rolls they ask for them to be returned in the little ziplock bags -for some strange reason they won't give out individual rolls.

Putting initials on the bag is very handy Jeff. I have to avoid going back to the same bank I re-deposit sorted coins so I don't get the same ones back!

Pedro
Title: RE: Straight Partial Collar
Post by: tooloot on July 17, 2016, 07:38:01 AM
Wow this is a game changer. The amount of times I've come across the same coins (eg with the exact same PMD) - I always figured it was just the price of noodling! I've definitely not been finding as many cuds/etc as I have in the past (however I really can't complain with my recent haul).

So to clarify, the Coinsafe or Secure-Safe are new coins brought to the bank that haven't yet been sent to Armaguard?
Title: RE: Straight Partial Collar
Post by: JeffH on July 17, 2016, 08:22:43 AM
I haven't seen any new coins in Armaguard bags for a few years. Ones I have seen have the coins in small, sealed, colour coded (different colours for different denominations) in a large coin safe type bag.

The coinsafe/secure bags are usually only used coins and could be coming from or going to Armaguard (or whatever security company the bank, supermarket etc. uses).
Title: RE: Straight Partial Collar
Post by: tooloot on July 17, 2016, 08:43:20 AM
Quote from: 'JeffH' pid='92717' dateline='1468709563'I haven't seen any new coins in Armaguard bags for a few years.

That's an omen. However, I did just find this partial collar and a 2000 10c mule from Armaguard hauls this week, so who knows!!
Title: RE: Straight Partial Collar
Post by: Fulvio on July 17, 2016, 09:16:57 AM
Quote from: 'tooloot' pid='92715' dateline='1468706881'So to clarify, the Coinsafe or Secure-Safe are new coins brought to the bank that haven't yet been sent to Armaguard?

Ohhh.. kay... [takes deep breath...]

I've written about this extensively over the years, if you want to let your fingers do the searching. :angel:

First, lets get some terminology and background in place.

The Mint produces UNC bags, made out of Mono-axially orientated LDPE with a notch cut through the seal and into the bag for easy opening. These bags are colour-coded with a triple stripe (one thick with two thin stripes) diagonally across.

The bags are packed in heavy LDPE sacks which are packed onto approximately 1-tonne pallets for pickup by Armaguard in unmarked semi-trailers destined for the various depots.

Loose coins are also packed into drums, two to a pallet, and shipped to Proseguo. And apparently Armaguard Brisbane. These coins are then rolled and supplied to ANZ by Proseguo, and various in Qld apparently (second-hand information from a Brissy Armaguard coin room employee).

Sacks are also supplied to Toll, either direct or via Armaguard, which supplies some Westpac branches (Burwood being one).

Armaguard packs recirculated coin into similar LDPE bags to the Mint, only with solid diagonal stripes (and more recently solid colours), which then go into the same LDPE sacks. They also roll recirculated coin for dispensers. Branches with roll dispensers appear to only get rolls. Other branches only get bags.

Toll bags have a thick vertical stripe, and contain recirculated coins.

Proseguo only supply rolls, whether UNC or recirculated, which are strapped in blocks made up of four shrink-wrapped slabs.

Branches with coin counters use Coinsafe sacks in the machines, filled with loose coin for return to Armaguard or reissue to customers. Branches without machines pack deposited coin into ziplock bags in cloth sacks, although they may ship sacks of loose coin to Armaguard (seems to vary by branch).

Branches can loosely be defined as coin generators or coin consumers. Generally speaking, shopping centres branches are consumers, while branches near schools, local shops or cash businesses are generators. Generator branches seldom or never get new coin, but may have rich pickings from cashed-in hoards. All my paper notes, copper and silver have come from generators, and occasionally they even have gold. You can't get UNC coins from generators... you have to go to consumers.

When noodling, here's what I do...

I pick up sacks from branch A, noodle them, being careful to cut the bottom (the side without the cut) of the bags. I then repack the rejects into the original bags as a roll and seal them shut. This gives a colour coded easy-tear roll that closely matches the original, yet is identifiably mine. If I have to use ziplock bags, I still roll them, and pack them into ziplocked 'slabs' to make them easier to handle. I then take these to branch B, where I swap for $5 notes (only because more notes increases the chances of finding keepers), look for first/last serials, radars, etc, then take them back to branch A. Rinse and repeat. Back in the day when we had some competition in the security business, I made sure A and B were served by different security companies so I wouldn't get my own rejects back.

It may sound complicated, but its really not, and I was doing $10,000 a day at the peak, before I slacked off. ;)

Also, be sure to keep an ample stock of ziplock bags and calico sacks on hand. They're free for the asking, and a bag of a hundred ziplocks and a handful of sacks is no problem (I've even been given BOXES of bags). Bendigo bank have the BEST sacks, with attached ties at the top. VERY handy! You can remove the printing from Ziplocks with Acetone, giving you clear bags you can heat-seal coins into (just remember LDPE is somewhat permeable to gasses). Sadly, CBA no longer use cloth sacks, and destroyed them all. They will give you Coinsafe sacks to pack loose coin into however. I tend to avoid CBA entirely, apart from asking for mutes.
Title: RE: Straight Partial Collar
Post by: tooloot on July 17, 2016, 09:45:13 AM
Thanks Fulvio - extremely comprehensive! I would definitely classify my local banks as generators. I'll have to give this a go. Luckily I have the morning off tomorrow, so let the fun begin!
Title: RE: Straight Partial Collar
Post by: Fulvio on July 17, 2016, 01:22:28 PM
Quote from: 'tooloot' pid='92723' dateline='1468714513'my local banks as generators.

Which reminds me.. where are you?
Title: RE: Straight Partial Collar
Post by: tooloot on July 17, 2016, 05:51:37 PM
Quote from: 'Fulvio' pid='92745' dateline='1468727548'Which reminds me.. where are you?

Elsternwick, and also work in Prahran.
Title: RE: Straight Partial Collar
Post by: Fulvio on July 18, 2016, 01:51:38 AM
Quote from: 'tooloot' pid='92753' dateline='1468743697'Elsternwick, and also work in Prahran.

Hmm. Southland's likely your best bet.

Also, why not bring that coin to the MNS errors and varieties night at the next meeting? Pop over to the Facebook group for event details.
Title: RE: Straight Partial Collar
Post by: tooloot on July 18, 2016, 06:27:08 AM
Quote from: 'Fulvio' pid='92765' dateline='1468772498'Hmm. Southland's likely your best bet.

Also, why not bring that coin to the MNS errors and varieties night at the next meeting? Pop over to the Facebook group for event details.

Thanks mate, I'll look into Southland. It's a bit hard because I work full time so getting to the bank when it's open can be tough (hence the machines have satisfied my noodling lust so far).

I'll check out info about the meeting. Not only do I work, but I also have a newborn so have to see.
Title: RE: Straight Partial Collar
Post by: Ozcoins on July 18, 2016, 09:24:05 AM
Great post on coin distribution  Fulvio.
My noodling has cut back a lot, and has changed from collecting coins from a teller at a branch near my work, to occasionally  collecting coins from a coin dispensing ATM near a friends place.
The coins from the ATM are in armagard rolls and tend to not have a large proportion of uncirculated coins, so this matches with what Fulvio said.
Re bank tellers.
I think they are likely to be a bit put out that you ask for something when they don't understand. I found that being nice and friendly built up a raport and they were happy to help.  Some asked questions so I would explain a bit about what I was looking for.  Generally they would not be that interested but would be happy to help.
I think the attitude changed over time from "Here's the wierd guy who asks for coins" to "Here's the friendly guy who asks for coins"
Title: RE: Straight Partial Collar
Post by: JeffH on July 18, 2016, 09:55:06 AM
Quotecojns?
I am not game to put that to spellcheck -I am thinking it might suggest "cojones"!
Title: RE: Straight Partial Collar
Post by: Ozcoins on July 18, 2016, 10:46:59 AM
Quote from: 'JeffH' pid='92776' dateline='1468801506'
Quotecojns?
I am not game to put that to spellcheck -I am thinking it might suggest "cojones"!

Whoops!
Title: RE: Straight Partial Collar
Post by: Fulvio on July 18, 2016, 06:23:36 PM
Quote from: 'Ozcoins' pid='92774' dateline='1468799645'My noodling has cut back a lot

Tell me about it!

I've basically stopped, after failing to get ANY UNC sacks in some 18 months from any of the three dozen branches I was visiting.

I spent today touring Woolies stores speaking to the managers, and the reactions I got typify the entire attitude towards our coinage. Even the ones who comprehended that UNC coins aren't UNC once they've been given in change, STILL were totally uncooperative.

What I WAS able to glean was that stores were allocated sacks depending on size. The smallest store had one sack of each. Nobody else would even tell me that. The tills have already been loaded for tomorrow morning, and the only advice was to show up at 7am and find out what, if any, restrictions are in place then.

This I regard as total bullshit, given that the overwhelming majority of customers don't care at all about these, and will just spend them. Even those who hang onto them won't treat them properly, and they'll be ruined.

And its a deliberate ploy by the mint I reckon. Trying to garner new collectors at the expense of existing ones, because we've all had a gutful of their Grannybait bullshit.

BAH!

Quote from: 'tooloot' pid='92768' dateline='1468789028'I also have a newborn so have to see.

Bring him/her along, and we'll see if we can get any bids! ;)

Yeah, bummer about the work thing. You may need to start training a gofer to get them for you. :)
Title: RE: Straight Partial Collar
Post by: Ozcoins on July 18, 2016, 09:58:39 PM
Fulvio,
Your determination is impressive! I have only been to a fraction of the number of banks you have been to.
Maybe some of what I wrote about building a relationship could help?
I can see how asking someone who doesn't know you about money deliveries to a business could raise suspicions.
When people  don't "get" coin collecting they may interpret questions as weird, risky or just troublesome?
Title: RE: Straight Partial Collar
Post by: ausjack on July 18, 2016, 11:07:52 PM
weird, risky or just troublesome

Yes that descriptions sounds like our Fulvio to a T :friends:
Title: RE: Straight Partial Collar
Post by: Ozcoins on July 18, 2016, 11:18:39 PM
Geeze AJ,
I was trying to be helpful,  not upset the guy. ...
Title: RE: Straight Partial Collar
Post by: ausjack on July 19, 2016, 12:03:40 AM
Mate it's like water off a ducks back, a McDuck to be exact :mocking: He's a good mate and don't worry he gives as good as he gets (even better) :dodgy: and you wouldn't want to hear what he says in messages :angel: he's a good sport :friends:
Title: RE: Straight Partial Collar
Post by: Fulvio on July 19, 2016, 02:19:31 AM
Quote from: 'ausjack' pid='92824' dateline='1468849072'Yes that descriptions sounds like our Fulvio to a T :friends:

You'll keep, boyo! :dodgy:

Quote from: 'ausjack' pid='92833' dateline='1468852420'he's a good sport :friends:

Hah! You want to read the stoush I'm having on Reddit right now. ;)

Quote from: 'Ozcoins' pid='92820' dateline='1468844919'building a relationship could help?

Oh, but I do! And I've had some awesome people 'on staff' over the years. Trouble is, they invariably move on. Whereas the ones who make it their mission to make your life difficult.. THEY hang around forever!

I don't mind people who just do their job and can't be bothered helping you if its not in their job description. You can always work around those ones. Its the ones who actively oppose what you're trying to accomplish that get up my nose. Like the manager at NAB Ashburton, who made it her mission to screw me out of all that silver, only to put it in the pocket of an Armaguard employee. THAT sort of BS turns me into a fire-breathing dragon, and I then make it my mission to take revenge! :diablo: