Australian-Coins Forum

Australian Coins, Banknotes and Exonumia => Australian Errors and Varieties => Topic started by: tooloot on June 20, 2016, 04:03:57 PM

Title: Planchet cracks/flaws?
Post by: tooloot on June 20, 2016, 04:03:57 PM
Sorry for lots of posts - I've finally had time to look through my coin collection and I'm unsure about a few. The following are some $1 coins that I suspect have planchet cracks/flaws and would like more expert opinions (.could be done at the mint, might be PMD - you decide!)

(http://imgur.com/kCYYCS5.jpg)
(http://imgur.com/HECz3yy.jpg)

Crack seems to be across roo #4's neck

(http://imgur.com/d6vQBJu.jpg)
(http://imgur.com/SpPvWRO.jpg)

Multiple cracks (not to mention prett beat up)

(http://imgur.com/uoXPWxJ.jpg)
(http://imgur.com/vF1naS0.jpg)

Crack across Roo #1's neck


I also have what I think is a die fill on the #7 on this 20c coin. Am I correct?

(http://imgur.com/pbEMnlY.jpg)
(http://imgur.com/fESO9U3.jpg)
Title: RE: Planchet cracks/flaws?
Post by: Nevol on June 20, 2016, 04:16:02 PM
Yes to die fill in the 7 of the 20c, not too sure about the others though.  Are the lines indented or raised above the surface of the coins. If they are indented they are probably gouges with any number of possible causes, but all most likely PMD in any case.

If a line is raised above the surface of the coin, it's more likely be a die crack.
Title: RE: Planchet cracks/flaws?
Post by: ausjack on June 20, 2016, 04:42:42 PM
Yes I agree with Nevol but the one's that go in could be a strike through (wire etc) but we need a lot clearer pic's to be able to tell as they're just a little too blurry sorry. But like Nevol said most will probably be PMD.

If you have a super macro setting on your camera try using that :)
Title: RE: Planchet cracks/flaws?
Post by: tooloot on June 20, 2016, 05:04:41 PM
Quote from: 'ausjack' pid='91098' dateline='1466406762'Yes I agree with Nevol but the one's that go in could be a strike through (wire etc) but we need a lot clearer pic's to be able to tell as they're just a little too blurry sorry. But like Nevol said most will probably be PMD.


If you have a super macro setting on your camera try using that :)

Which one are you talking about? I can upload more photos
Title: RE: Planchet cracks/flaws?
Post by: ausjack on June 20, 2016, 06:47:53 PM
All of the dollar coins, the second one may be a lamination.
Title: RE: Planchet cracks/flaws?
Post by: Fulvio on June 21, 2016, 12:36:27 AM
(http://fulvio.jovianprojects.com.au/coins/forum/composite.jpg)

OK, so...

The 20¢ is a fill, of the 7 and E. Nice one.

The middle MoR is probably a strike through wire, but we'd need better pics to be 100% certain.

The left one is almost certainly PMD, judging by the damage on the roos. Looks nothing like a flaw.

The right one has me tossed. Probably PMD, but sharper pics might reveal something else going on.

So one win, one probable win, and two probable losses. Not bad innings. ;)
Title: RE: Planchet cracks/flaws?
Post by: tooloot on June 21, 2016, 05:50:32 PM
Quote from: 'Fulvio' pid='91122' dateline='1466435187'(http://fulvio.jovianprojects.com.au/coins/forum/composite.jpg)

OK, so...

The 20¢ is a fill, of the 7 and E. Nice one.

The middle MoR is probably a strike through wire, but we'd need better pics to be 100% certain.

The left one is almost certainly PMD, judging by the damage on the roos. Looks nothing like a flaw.

The right one has me tossed. Probably PMD, but sharper pics might reveal something else going on.

So one win, one probable win, and two probable losses. Not bad innings. ;)

Thanks! I'll try to get some clearer pictures. I've only got an iPhone (and an older version at that) so I'll do my best!
Title: RE: Planchet cracks/flaws?
Post by: Goldseeker on June 21, 2016, 06:35:30 PM
If you have a scanner, use that.
Title: RE: Planchet cracks/flaws?
Post by: ausjack on June 21, 2016, 07:55:16 PM
I don't know if it's true or not as I don't have a phone that takes pic's but have heard you can get a little magnifying glass thing that clips onto your phone so might be worth looking into.
Title: RE: Planchet cracks/flaws?
Post by: Fulvio on June 22, 2016, 06:50:05 AM
Quote from: 'ausjack' pid='91194' dateline='1466504716'I don't know if it's true or not as I don't have a phone that takes pic's but have heard you can get a little magnifying glass thing that clips onto your phone so might be worth looking into.

Those magnifiers will help you get in closer, but they won't do anything about the camera resolution or image sharpness. And there's a huge difference in camera quality between models. Check this out:

http://ipod.about.com/od/decidingwhichipodtobuy/a/iphone_chart.htm

Me, I'd be buying a USB scope. They can be had for as little as $50, and I see Jaycar now has a 5MP one for a reasonable price: http://www.jaycar.com.au/5mp-usb-2-0-digital-microscope-with-professional-stand/p/QC3199
Title: RE: Planchet cracks/flaws?
Post by: JeffH on June 22, 2016, 07:14:45 AM
If anyone is interested in a Jaycar scope , I have access to wholesale pricing for all Jaycar products.
Let me know of anything you are interested in (catalogue number please) and I can check pricing for you. If the price is right I will add your item(s) to my next order.
Jeff
Title: RE: Planchet cracks/flaws?
Post by: Fulvio on June 22, 2016, 08:09:47 AM
Quote from: 'JeffH' pid='91213' dateline='1466545485'If anyone is interested in a Jaycar scope , I have access to wholesale pricing for all Jaycar products.

Now that's handy to know. Can you check what that one's worth wholesale?

I've already got a scope, and Mac compatibility is of course an issue, but if the results from this 5MP are good enough, and it works with my hardware, and the price is right, I could certainly be interested in an upgrade. :)
Title: RE: Planchet cracks/flaws?
Post by: trout on June 22, 2016, 08:18:16 AM
I haven't felt the need to use my USB scope since I bought my 24mp DSLR camera teamed up with good Tamron lens.
All I have to do is take an image of the coin and crop the area of interest.
The images in RAW format are huge and the small sections that I "Blow up" don't loose any definition when I crop them and convert to jpg :good:
Title: RE: Planchet cracks/flaws?
Post by: JeffH on June 22, 2016, 09:51:09 AM
Email sent Fulvio.

Software appears to be the same as their previous models if that is any help. Mac version is available as a free download and Kaiser Baas also appears to use the same software.
Title: RE: Planchet cracks/flaws?
Post by: Fulvio on June 22, 2016, 11:20:33 AM
Quote from: 'JeffH' pid='91224' dateline='1466554869'Kaiser Baas also appears to use the same software.

Oh cool. I've got one of the versions working with my KB and version of OSX. :)

I'll think about it and get back to you. No rush, right? And if others are interested, that should help.
Title: RE: Planchet cracks/flaws?
Post by: JeffH on June 22, 2016, 11:42:05 AM
Indeed; the more on the order the cheaper the price.