Australian-Coins Forum

Australian Coins, Banknotes and Exonumia => Australian Errors and Varieties => Topic started by: tooloot on May 12, 2016, 08:28:40 AM

Title: PMD or error?
Post by: tooloot on May 12, 2016, 08:28:40 AM
Hi guys.

I found another one and wanted people's opinion - there seems to be a crack along the outer edge and wasn't sure if it was PMD or a misstrike/double strike/other minting error? It is on the 2005 commemorative WWII anniversary $1 coin. Any advice would be great, thanks!
Title: RE: PMD or error?
Post by: trout on May 12, 2016, 08:59:01 AM
From what I can see from your images is a slightly off centre strike
Title: RE: PMD or error?
Post by: Unicorn on May 12, 2016, 09:18:22 AM
:i_agree: with Troutski.

Misaligned die strikes are very common on the 2004 MOR and 2005 Dancing Man $1 coins.
Title: RE: PMD or error?
Post by: Fulvio on May 12, 2016, 12:32:08 PM
Quote from: 'tooloot' pid='88523' dateline='1463007520'PMD or a misstrike/double strike/other minting error?

Its not PMD, but its also not worth anything, really.

When the three dies (hammer, anvil and collar) come together and the planchet is struck and turned into a coin, the force of the blow effectively plasticises the metal and it will try and flow away from the force. If there are any tiny gaps in the joint, it will try and escape through them. That's what you've got.

As you can imagine, its pretty challenging to get things perfectly aligned every time, so quite a lot of coins have rim flaws. I've got some impressive split rims for example... Impressive, but pretty much worthless because nobody wants them. :(

Of course, occasionally things go really badly wrong, and that changes things. If the collar doesn't fully engage, for example, you can get a partial collar error (I'd call it a flaw though) like this:

(http://www.coincommunity.com/forum/uploaded/jpl/20140225_resulta.jpg)

A coin like that can be worth serious money, because its both more spectacular and much rarer.

PS: See how I put the image inline? To do that, I used (with spaces added so you can read it)

[ img ] http://www.coincommunity.com/forum/uploaded/jpl/20140225_resulta.jpg [ /img ]

The reason for doing this is that a) you only have limited storage space for attachments, and b) you can link any image from anywhere on the net.
Title: RE: PMD or error?
Post by: tooloot on May 12, 2016, 01:14:19 PM
Thanks for the advise guys, also on useful ways to upload photos here. Appreciate it!
Title: RE: PMD or error?
Post by: Unicorn on May 21, 2016, 12:02:11 PM
Here's a 2005 Dancing Man with some pretty serious misalignment.

You'd think this much offset would impact the rim (making it a partial collar), but nope.

(http://www.australian-coins.net/gallery/albums/userpics/11067/2005_1_dm_mad_2.jpg)
Title: RE: PMD or error?
Post by: trout on May 21, 2016, 12:04:10 PM
I bet that double rim made you look twice at the date Mate :)
Title: RE: PMD or error?
Post by: Unicorn on May 21, 2016, 12:12:10 PM
:laugh2: ... Yes, they always increase the "revs" a bit.
Title: RE: PMD or error?
Post by: Fulvio on May 21, 2016, 06:38:05 PM
Quote from: 'Unicorn' pid='88929' dateline='1463797931'You'd think this much offset would impact the rim (making it a partial collar), but nope.

So, what are the reverse and edge like?

I would expect that if the planchet was off-centre, both sides would be similar, and the milling wouldn't be even all the way round. Even with interrupted milling, there should at last be a patch that isn't quite right.

OTOH, if the reverse is normal, then that would mean the obverse die was off-centre. That shouldn't happen, in theory, but then again, this IS the Dodgy Brothers Mint RAM, right? :angel:
Title: RE: PMD or error?
Post by: Unicorn on May 21, 2016, 07:33:50 PM
Here's the reverse.

All milling present and accounted for, nothing odd. The thinkness of course does vary from 2.49mm on the no rim side to 2.94mm on the double rim side.

(http://www.australian-coins.net/gallery/albums/userpics/11067/2005_1_dm_mad_3.jpg)