PPH and I found this right before the end of the show yesterday. And it's the buy of the show IMHO. Can you see what we saw?
(http://www.australian-coins.net/gallery/albums/userpics/10001/australia-2007-dollar-shb-reverse.jpg)
mark I would say double stamped dates and an extra stamp under the stamped mm on the crosses of the bridge ..
how did I go .. ,, kel ,,
now I wll go and check mine out , I have 3 of them to look at . ,, kel ,,
Looks like a double mintmark ,there is another one below the original :good:
Very Nice
Having a GOOD look at this it seems the coin has been double struck and rotated.
There is a faint impression on the l/hand side of the bridge and a line in the centre, Also on the l/hand main beam that makes this look as if it has been struck rotated 10-15% and struck again
:cray: that's very touching, you really shouldn't have mate but I see a coin for me :laugh2:
But serious, I was wondering about the "2" as well, should it be filled closed like that or have a slight gap, so there's the mark across the middle of the bridge and on the left end, counterstamp thingy and not having one or seen one but looks to have a bit of doubling here and there but a nice coin mate or should I say PP :whistle2:
Quote from: 'markn' pid='30838' dateline='1381708464'PPH and I found this right before the end of the show yesterday. And it's the buy of the show IMHO. Can you see what we saw?
(http://www.australian-coins.net/gallery/albums/userpics/10001/australia-2007-dollar-shb-reverse.jpg)
Here is a standard C mintmark coin as a reference AJ :ok:
(http://www.australian-coins.net/gallery/albums/userpics/10019/2007_sydney_harbour_bridge_C_mintmark.jpg)
Quote from: 'trout' pid='30848' dateline='1381710234'There is a faint impression on the l/hand side of the bridge and a line in the centre, Also on the l/hand main beam that makes this look as if it has been struck rotated 10-15% and struck again
I saw that and thought it was an impression left on the "plastic"
thanks trout, looks like the "2" should be like that :scratch_one-s_head:
maybe Mark might want to swap ya :dontknow: but I can imagine he has a look something like this :shock: or this :fie: but then :nea: :P
it certainly has a lot of errors/flaws
What a beauty Mark ...... had the seller seen the double strike etc?
Yes it was for sale as double struck. It's still in it's mintmark folder, we'll take it out shortly. Looks great in a big pic like that!! It was a weekend for Sydney Harbour Bridge items, more to come soon......
What are the lines behind the bridge and in the vicinity of the LH pylon?
Almost look like die cracks.
ok well spotted everyone. The coin is still in the mangy holder the RAM issued it in at the Canberra Collectables Fair in 2007. It's a double mint-mark. Pretty scarce thing. And yes, the seller knew what it was but he was sitting next to us for two days and was very friendly with us and gave us very good price on it. For one of two reasons, first he'd had it since 2007 when he got it for issue price, and second, I think he liked PPH's blue eyes :P
Is it double mintmarked and / or double struck as well? To the left of the bridge looks like a double stike? I was curious about the seller knowing as I thought it might be 'find of the ýear' from a bargain bin or the like.
Regardless, what a great coin!
Mark, your duck is definately broken.
I've indicated the areas that have peaked my interest.
(http://i40.tinypic.com/a4suok.jpg)
You are one lucky son of a gun to find that. Now I suppose PPH will have to go out and work to replace the money in the bank that you took out to pay for it..........
The marks must have been impressions of the design on the plastic and the coin has rotated slightly since. The coin out of the package doesn't show those marks at all. Oh but the double mintmark is still there :yahoo:
Very nice pick-up! :yahoo:
and here I was - looking for the Ghost of the Harbour Bridge
boring ......
well if I had one Mark I'd be getting her to bat those baby blue as much as I could :) but are you sure it were her's that were being looked at :winkextra:
**giggle**
mark does have very nice charming eyes, as a matter of fact
wink wink say no more :)
OK, I'm confused....
Since when do they do portable press C mm's? AFAIK, the C's have always been heavy presses, which makes that rotated C pretty remarkable, with no evidence elsewhere of a double strike (even if the doubled bridge was real, its in the wrong direction).
Quote from: 'Fulvio' pid='30900' dateline='1381738786'OK, I'm confused....
Since when do they do portable press C mm's? AFAIK, the C's have always been heavy presses, which makes that rotated C pretty remarkable, with no evidence elsewhere of a double strike (even if the doubled bridge was real, its in the wrong direction).
The RAM had the PP at the Canberra Collectables Show in 2007 which was held at the Rydges out near Manuka. PPH was there in person.
Quote from: 'robbiegal' pid='30885' dateline='1381736751'**giggle**
mark does have very nice charming eyes, as a matter of fact
I am not sure how you can see them. They are beady and always squinting.
Quote from: 'markn' pid='30903' dateline='1381739277'PPH was there in person.
Oh. What, and no amount of fluttering eyelashes worked on the press operator????
Quote from: 'Fulvio' pid='30920' dateline='1381740199'Quote from: 'markn' pid='30903' dateline='1381739277'PPH was there in person.
Oh. What, and no amount of fluttering eyelashes worked on the press operator????
I am sure she got some from the press at the time. 400 odd coins went to Ed Cummings as his dealer allocation. Another 20 went as a dealer allocation to the fellow we bought this coin from. This was among the 20.
Quote from: 'markn' pid='30926' dateline='1381740408'This was among the 20.
Whaaaaaattt? Was she asleep on the job then? If it was me, I'd be kicking myself for letting something like that slip through my fingers.
Quote from: 'Fulvio' pid='30938' dateline='1381741440'Whaaaaaattt? Was she asleep on the job then? If it was me, I'd be kicking myself for letting something like that slip through my fingers.
She? The RAM operator was, whoever that was. PPH had nothing to do with it, she was there as a show attendee and no doubt lined up to get her coin like everyone else. From what I gather dealer allocations are made before the show opens or after it closes or when things are slow. Or in the case of the Perth show a few years back the dealer allocation was made in Canberra before the press even left the ACT.
Oh, I see.. I'd read it as PPH got the coins on behalf of others, like Goldy and co often do.
Yeah, back in the day I'd get a few hundred M's, which they'd either do before the show or during quiet spells. Saved heaps of time on my part. ;)
mint your own in perth that has already been pressed..umm sounds fair.
So you have p holes in the snow..I know what it's like mate :)
Quote from: 'markn' pid='30904' dateline='1381739303'Quote from: 'robbiegal' pid='30885' dateline='1381736751'**giggle**
mark does have very nice charming eyes, as a matter of fact
I am not sure how you can see them. They are beady and always squinting.
bashful, aren't we??
I think the dealer we got this off just found his in his dealer allocation when he got home and inspected them later. In other news I was there pressing my own coins completely independent of this incident.
can you tilt these things like you can the old pinnies :)
Quote from: 'ausjack' pid='30956' dateline='1381742671'can you tilt these things like you can the old pinnies :)
I think the RAM would get very upset at you if you tried to tip their press like a cow.
Quote from: 'robbiegal' pid='30949' dateline='1381742267'bashful, aren't we??
No. I just have beady squinty eyes.
QuoteNo. I just have beady squinty eyes.
NO worries, I don't think for one minute that you or PP have a squinty outlook tho Mate :yahoo:
Quote from: 'markn' pid='30967' dateline='1381744017'I think the RAM would get very upset at you if you tried to tip their press like a cow.
Sing along now....
"Oh, its a long way.. to Tip-a-Coin-Press..." :dodgy:
Quote from: 'markn' pid='30967' dateline='1381744017'Quote from: 'ausjack' pid='30956' dateline='1381742671'can you tilt these things like you can the old pinnies :)
I think the RAM would get very upset at you if you tried to tip their press like a cow.
Well I'll have to come down and go to a show with ya and we can have a go..you just reminded me of this ad that cracks me up and I'm told I'm a little like the bloke :laugh2:
doh here the link sorry http://www.youtube.com/watch?v=N2nMRPAZSQU
in attitude that is not looks ;)
Quote from: 'markn' pid='30968' dateline='1381744054'Quote from: 'robbiegal' pid='30949' dateline='1381742267'bashful, aren't we??
No. I just have beady squinty eyes.
ok
you win
i'll agree with you mr beady squinty eyes
I have never seen or met Markin or PP but I can assure you they are STOUSH people .
Actions speak louder than words and IMHO these pair are AWSOME regardless of their eyes :ok:
Back to the topic in hand. Mark named this topic can you see it, I think he should have named it can you C it. Here's the second C under the dino I took tonight.
(http://www.australian-coins.net/gallery/albums/userpics/10002/second-c.jpg)
Thanks for that, PP. It clearly shows something that was bugging me about this.
Given that the MM die is an incused C on a raised circle, how come the underlying coin doesn't seem to reflect this, particularly around the centre of the C? It should all be flattened like the edge of the girder in the top section. Clearly there is sufficient pressure, as it obliterated one and two half rivets, so why not the rest?
Quote from: 'Fulvio' pid='31129' dateline='1381839552'Thanks for that, PP. It clearly shows something that was bugging me about this.
Given that the MM die is an incused C on a raised circle, how come the underlying coin doesn't seem to reflect this, particularly around the centre of the C? It should all be flattened like the edge of the girder in the top section. Clearly there is sufficient pressure, as it obliterated one and two half rivets, so why not the rest?
It's a raised C in an incuse circle. Strike pressure was clearly low and the C in the die was not even close to being filled as not even the rivets in the C have been flattened much.
Quote from: 'markn' pid='31151' dateline='1381871980'It's a raised C in an incuse circle.
On the coin, yes. The die is reversed. I wouldn't expect the rivets to be flattened. I would expect the spaces between the girders to be, like in the lower right. Yet the triangular section across the C shows no sign of being struck at all.
Just saying it looks odd, that's all.
it's the SHB ghost
I just know it
Quote from: 'robbiegal' pid='31223' dateline='1381922383'it's the SHB ghost
I just know it
Nothing Supernatural about this RG.
It is simply a double struck, Rotated die coin and quite a noice one at that :)
ha ha
mystery adds to the value!
Quote from: 'Fulvio' pid='31217' dateline='1381920516'On the coin, yes. The die is reversed. I wouldn't expect the rivets to be flattened. I would expect the spaces between the girders to be, like in the lower right. Yet the triangular section across the C shows no sign of being struck at all.
Just saying it looks odd, that's all.
I think you're seeing an optical illusion in PPH's micro image. It fooled me too until I looked at the actual coin. The diamond shape that the C appears to have missed striking is incuse rather than in relief as it appears.
*I wouldn't expect the rivets to be flattened.*
You absolutely would. If the strike had enough pressure the rivets would flatten out as the metal spread to fill the C in the die.
The diamond and triangle are incused hence part of the C is missing. The rivets are raised but the C may have been deeper than the letter (or the pressure was too low) so the rivets didn't get squashed. The pic is a bit of an optical illusion.
Quote from: 'purplepennyhunter' pid='31254' dateline='1381971618'bit of an optical illusion.
so are ghosts
Quote from: 'robbiegal' pid='31272' dateline='1381995087'Quote from: 'purplepennyhunter' pid='31254' dateline='1381971618'bit of an optical illusion.
so are ghosts
I know some phantasms who would disagree with that... :angel:
I had to google that one